Search results

  1. Dougfir

    A few opinions please

    Wouldn't shortening OAL increase pressure though?
  2. Dougfir

    QL Help for Granddaughter's 7-08 ?

    I've shot that bullet a fair bit in my 7mm-08. It's a nice bullet and a great deal. I was generally able to get it shooting well. Good luck!
  3. Dougfir

    A few opinions please

    So, I'd appreciate a few other perspectives. I'm in the process of working up a load for my new hunting rifle (Tikka T3x lite in 7mm-08). I've been working with the 140 grain E-tip and found a promising load that I'd like to play with more. The load is: 140 E-tip, 41.5 grains varget @2.775"...
  4. Dougfir

    A favor from Dr. Mike?;-)

    Are you saying that there's a new version of the book that has the H 4350 data for 140 grain bullets, now? I called Nosler the other day and they said they didn't. They recommended I use the 140 and 145 grain data on the Hodgdon website as guidance, which I can do, I just like having as much...
  5. Dougfir

    200 AB in 35 REM

    Never tried it, but it strikes me as a waste of money. One of the beauties of a round like the .35 Rem is that just about any bullet will hold together well at those velocities. No need for bonding.
  6. Dougfir

    Pump guns don't shoot.

    Mine shoots terribly, but it does the job I need it to. I keep it with just a ghost ring and a fiber optic front sight. It's my bad weather/brush gun and I only need it to shoot minute-of-deer at <100 yards, which it will do. However, I went on a kick, at one point, trying to find an...
  7. Dougfir

    A favor from Dr. Mike?;-)

    Thanks. I do use their data quite a bit, they just don't have any 140 data for H 4350.
  8. Dougfir

    A favor from Dr. Mike?;-)

    Fotis, any chance you'd run the same load for me, but with the 140 Nosler e-tip instead? I can't find any reliable load data for that. Thanks!
  9. Dougfir

    QuickLoad questions thread...

    Ah, that's interesting. I wonder if my mac is new enough... Thanks, Dr. Mike.
  10. Dougfir

    A favor from Dr. Mike?;-)

    Thanks all! I'm surprised, I thought H 4350 would push it a little faster than that. I'm guessing the LRX is a tad longer than the ttsx and might eat up a little more case capacity, as well.
  11. Dougfir

    A favor from Dr. Mike?;-)

    Barnes doesn't seem to have any data for H 4350 and the 7mm-08. I'm looking to try the following load: 7mm-08 2.775" 139 grain Barnes LRX H 4350 22" barrel If you were willing to run that for me, on Quick Loads, I'd be very grateful!
  12. Dougfir

    QuickLoad questions thread...

    What's the current status of Quick Loads, in terms of what platforms it's available on, etc? Last I checked, it was not available on Mac. Seems to me like it would make an excellent app, and one that just about every reloader in the world would pay good money for, if it was just accessible and...
  13. Dougfir

    Quickloads request 7mm-08

    If you wouldn't mind: I'm trying to figure out which powder I'm going to use to play with the 139 Barnes LRX in 7mm-08. (I only have 12 bullets which I got for free). Any chance you could run one of those lists of various powders? 7mm-08, 139 Barnes LRX, 2.775" Thank you!
  14. Dougfir

    Couple of E-Tip questions

    Sounds like you can't go wrong. I've yet to shoot anything with the e-tip, but have been impressed with the performance of accubonds and TTSX's.
  15. Dougfir

    Favorite 7mm08 deer load.

    Mine is currently shooting 140 e-tips. Federal case, H 4895 to right around 2700fps. WLR, I think it's 2.775" It shoots right around 1" from my M-70 featherweight. I've cooked up more accurate loads using accubonds and ballistic tips, but am feeling pretty good about shooting lead-free these...
  16. Dougfir

    7x57 Mauser -Rem 700 with RL17 & 150 grain bullets

    Do they make a 150 accubond, now (other than the LR)? Your question about data sounds like a good one for Quick Loads... I've never owned a 7x57, but I do reload for a 7mm-08 and I'd guess that the velocities you're hoping for are very optimistic.
  17. Dougfir

    H4895.

    My favorite powder. I use it for almost every load my family shoots, in .30-06, .308 and 7mm-08. I don't get dazzling velocity from any of them, but I get consistent, accurate loads at regular ol' velocities. It doesn't seem very sensitive to temps, it's great for reduced kid loads and the...
  18. Dougfir

    The Verdict on E-Tip Bullets???

    I switched from 140 accubonds, to 140 e tips in my 7mm-08. I've been able to get very similar results, in terms of velocity, by just going with a longer length. Both loads are running about 2700fps with H 4895 and both are accurate. The accubond is at 2.75" and the e tip is at 2.775" Good luck!
  19. Dougfir

    7mm-08 160 gr Accubond

    Nice! Mine liked 160 accubonds, too. I was using a max load of IMR 4350 and getting a bit over 2500fps. Not a flat shooter, but certainly capable.
  20. Dougfir

    30-06 QL Request

    Yeah, this is a peep sighted brush gun. It gets used inside of 100 yards, so I don't really care whether I get 2600 fps, 2700, etc. Right now, I shoot a pretty hot load of 4895 with 180 speer hot cors and get 2650fps out of the 19" barrel, with no noticable muzzle flash.
Back
Top