If someone could please run a quickload for me please
140 nosler bt
Hornady brass
Fed 210
H4831SC
Coal 2.935
22 inch barrel
Wanting to give this powder a try. It works good in my 243. I just dont see alot of data out there.
Thanks Michael
Sent from my SM-G965U using Tapatalk
Could someone please run a quick load for me.
243
24in. Barrel
Fed 210 primer
95 nbt
H4350
Imr 4064
I am using federal brass I dont have a water capacity.
I have been trying r19 and getting very erratic results. Think I need to switch powders.
Thank you Michael
Sent from my SM-G965U...
Hey guys looking for some opinions. I am looking at buying a new rem sps 243. It will have a 24 in 1x9x12 twist barrel. Which means 1x9 and a quarter right? My man purpose with this gun will be our south Alabama whitetail deer and a few hogs. Will also be shooting some steel out to 500. The...
Shooting my 6.5 creedmoor with 41g of h4350 and nosler 140 bt jumping 80thousands. The gun is shooting right at 1inch or under at 100 yards. The 3 shot groups are a perfect triangle. Do i need more jump or get closer to the lands?
Thank you Michael
Sent from my SM-G965U using Tapatalk
Was thinking of trying imr 4451 with the 140 nosler bt. Has any one tried this combo?
6.5 creedmoor
Hornady brass 52.5 h2o
Fed 210
140 nosler bt
Coal 2.825
Rem 700
26 inch barrel
If someone could run a quick load for me would be great so I will know where to start
Thank you Michael
Sent...
Opinions on this bullet vs the120 nosler ballistic tip. Pushed at around 2800fps. Will be used for whitetail in Alabama from 35 to around 150 yards. A big bodied buck around here will be around 200 does will avg.100. Mostly high shoulder shots
Thank yall Michael
Sent from my SM-G930V using...
Just got a new Thompson center venture in 243. It has a 22in 1x10 twist barrel. Will be used for deer hunting. 40 to 250 yards. Looking for a place to start with reloading for it. Shoulder shots are my norm. I have h4350 varget imr4895 imr4064 r26 r15. I want to shoot nosler bullets. Need...
Has any one tried this powder in a 7mm08. It works good in my 6.5 creed with 140 nosler part. Thoughts and opinions with the 7mm08?
Thanks Michael
Sent from my SM-G930V using Tapatalk
Hey guys going to see if any one had experience with this combo. Would like to have a safe starting point. If someone could please run a quickload that would be great too.
6.5 creedmoor
Nosler 140 partion
Peterson brass 50.2 water capacity
Rl 26 I also have imr 4451 and h4350
22 in barrel.
Not...
Wanting to shoot a bonded bullet in my savage 6.5 creedmoor that has a really long throat. Have tried 130 accubonds and cannot get the consistency I am looking for. Of the 2 which would you try. Shots will be mostly deer and a hog every once and awhile. Shots will range from 30 to around 250...
Killed my biggest 8 point yesterday afternoon. The deer was about 170 yards quartering to me. Bullet entered on the left side right where the shoulder and chest meet about middle ways. Found the bullet in the hide about 8 in behind the offside shoulder.
The load
Imr 4451 43g
120 ballistic tip...
Loaded 43g in Peterson brass with a coal of 2.925 Fed 210 primers. It shot around 3/4 of a inch @ 100 and about 1.5 at 200. Don't have any data with this powder and bullet. I normally shoot 44 g of H4350 so I backed down a grain.
6.5 creedmoor
Peterson brass 50.2 h2o capacity
Imr 4451
22...
Going to try some 125 pt in my creedmoor for deer. I am also getting some imr 4451 to try to find a replacement for h 4350. Looks like it takes between .5 to 1 grain more of the 4451 than 4350 for the same fps. I have a really good load with 120 bt and h 4350 but would like to try 4451 with...
What is y'alls experience with ramshot big game. Thinking of trying it in my 6.5 creedmoor and 7mm 08. Looking at data it should be pretty close to h4350 which works great in my creedmoor but I can't hardly get my hands on it. Any thought would be great. Would be using it with 120 bt 125 pt 135...
Well after about 50 rounds down range 2 different powders 2 primers and 2 differnt brass. I think I got it.
Peterson brass 50.2 water capacity
H4350 43.0g
135 berger classic hunter
Fed 210
Coal 2.925
22 inch barrel
5 shots at a 100yards. Could some one run quick load and see about where I...
What is the least amount of bullet I can have seated in the neck and still have enough neck tension and be safe?I can go out to 3.00 in this 6.5 creedmoor and still feed from the magizne. Not sure if it will touch the lands their or not. I am going to try to measure that tonight. These berger...
Thought I would just try something different. Never heard of anyone running this powder in a creedmoor. Ist shot is the low one on a warm barrel next 3 went through the same hole and I pulled the 5 one as normal!
Peterson brass 2nd firing 50.2 water capacity
Imr 4064 37.5g
Fed 210 primer
130...
Got a new sightron stac 4x20x50 coming for my savage 16 6.5 creedmoor. Looking for options for rings and a base. It has the 2 piece base from the factory now. Thinking about leaving them and just getting a nice set of rings. What are yalls thoughts?
Sent from my SM-G930V using Tapatalk
Finally got my hands on some rel 26. Have some berger 135 classic hunters and some 130 accubonds. Could someone run a guickload with those two bullets.
6.5 creedmoor
Nosler brass 52.2 capacity
Cci 200 primers
22 inch barrel
Coal 2.800
Reloder 26
135 classic hunters berger
130 accubonds
140...