Recent content by hunting1

  1. H

    30 cal 168 grain BT vs ABLR

    https://www.24hourcampfire.com/ubbthrea ... ow_femurs_ I like the .308 168gr NBT for my 308's and 06!
  2. H

    New 300 Win Mag is coming

    I like H1000 and 200gr NAB's myself. I get great speed and accuracy.
  3. H

    168 Nosler Ball Tip vs Hornady ELD Match Test on Water jugs

    168 NBT: They work! Bear didn't move. Antelope don't like them either.
  4. H

    308 Win loads and 20 inch barrel

    What he said! I got around 2700 fps with this and a 20' barrel.
  5. H

    223 coyote load

    I use 55 gr NBT and 25 grs of H335. The 40 grainers with Varget are great too and no pelt damage.
  6. H

    Reloading for an AR

    55 grain NBT and H335, AR Comp, or CFE are my vote.
  7. H

    Who loads 80 gr Nosler Custom Competition bullets .223 Rem?

    I did not chrono but had a Ruger 1/8 and loaded Varget and RL15. Both shot well. I used WSR primers as well. Good luck.
  8. H

    300 WSM

    I am loading 64 grs of IMR4350 and 180 NAb or H4831sc and 190 gr Berger with good luck.
  9. H

    200 or 180 gr accubonds in the 300 in mag

    I like the 200's for what it is. Mine loves H1000 and NAB 200 grainers. Either will work though.
  10. H

    200 grain Partition in 300 Win mag ?

    I like H1000 or H4831SC for mine.
  11. H

    Nosler Brass

    Here is a 165 NP recovered from the off side hide of a 3-year or so bull elk and a 30-06 around 2825fps or so and 100-yards. First one sailed through, this was the second shot.
  12. H

    180 AB in 300 WM

    All my rifles have always done best with jump using AB's. Start at 3.340 IMHO.....
  13. H

    300 win mag 200g

    I have really good luck with 200 gr NAB and H1000. The speed and accuracy is amazing.
  14. H

    Loading Room Updated

    Good stuff! For you that load in doors, how do you not get brass shavings and powder all over? As hot as it has been lately, the garage is sucking lately. Guess I could lay laminate or wood flooring.
  15. H

    New 300 wsm w/180/190 gr load question

    I load to factory OAL and as said AB's like jump. I use IMR4350 from 20-90 degrees and it is not as scary as the internet leads you to believe.
Back
Top